Bi-fold Closet Doors

The contractor took down the bi-fold doors in the guest room to lay the new flooring. Almost 2 years ago. I've been camping in the guest room so I don't kick my SO's broken leg while I'm sleeping, and finally got sick enough of staring into the (funky, half-painted) closet to tackle re-hanging the doors.

What none of the instructions or videos I looked at bothered to mention is that you adjust the bottom pins (they're screws) to adjust the top clearance. Screw them too far in, and you'll have a big gap between the door and top moulding. Screw them too far out, and the door won't clear the moulding. It's kind of a Goldilocks thing, you want them to be "just right". Lets just say it took several attempts to find the sweet spot. And you have to remove the door to make adjustments. Since I was doing this by myself, that was a PITA.

The other important thing to note is that the position of the pin in the bottom bracket in relation to the top bracket in the track dictates whether or not the door hangs "plumb". Since you have to loosen the top bracket and slide it over so you can pop in the spring loaded pin on top of the door, and then slide it back into place, it's tricky to get it right. Especially, since the position of the pin in the bottom bracket, and the final position of the top bracket also control the left-right position of the door (and whether or not you have too big a gap between the doors, or not enough room to shut them.)

All said and done, it wasn't that hard to hang the doors, but I had to do it several times to get them positioned right. At least I don't have to stare at the ugly closet any more!

Tools Required: Screwdriver
Project Time: 30-45 minutes
Difficulty Level: Easy
PITA Rating: Moderate

It's Usually Not as Easy as They Make it Look

I love being able to find instructions and videos for random DIY projects on the Internet. However, after tackling a wide variety of projects, it's become abundantly clear that what you need to know to finish the job is often what they gloss over or edit out.

I suppose there's something to be said for making it look easy, but the reality is that it often isn't. However, if you know ahead of time what the trouble spots are, sometimes you can avoid them entirely. And if you can't, at least you know what you're really in for and have some idea how to work through the problems.

That's what this blog is about: highlighting the "gotchas" you're likely to encounter when tackling assorted DIY projects. Read the instructions and watch those slick videos, then come here to get the "dirt" on your next DIY adventure.